KCOM ROUTERS AND EQUIPMENT REVIEW

KCOM routers review: How good are they?

KCOM supplies three different eero routers across its current packages. Power Fibre customers get newer Wi-Fi 7 routers, while the rolling packages use the older eero 6+. Every model works with the same app and mesh system, but the ports, coverage and Wi-Fi bands aren’t the same.

By Data checked  Checked weekly
KCOM routers and equipment hero with FibreDog holding an Amazon eero Pro 7

KCOM routers and equipment scorecard

Six key areas. One overall score. All calculated using our transparent methodology.

Wi-Fi quality

How good the standard routers’ Wi-Fi is in everyday use, looking at specifications, Wi-Fi bands/type, and how many devices they can support.

7.7/10

Wi-Fi range

How far the router’s Wi-Fi should reach around the home, with consideration given to local factors like large homes or thick walls.

7.6/10

Whole-home Wi-Fi

Whether the provider offers a mesh router system or extra help for larger homes, whether it’s good, and whether it’ll cost you extra.

7.6/10

Wired connectivity

How well the router supports Ethernet and wired devices, looking at number of ports, their speeds, and how accessible they are.

6.8/10

Router controls

How much control you get through the app, admin page and any controls you might have on the router itself.

6.8/10

Using your own router

How easily you can use your own third-party router or mesh hardware – whether you can use anything you like or if it’s limited in any way.

9.9/10

Wi-Fi quality

The router you get depends on your package and, with Power Fibre 900, your postcode. That sounds complicated, but the basic split’s simple: rolling packages use eero 6+, while Power Fibre uses eero 7 or eero Pro 7. They all share the same app, security and mesh system.

Key differences

Your package and postcode decide which eero KCOM supplies

Roll 300 comes with one eero 6+, while Roll 900 comes with two. Power Fibre 150 and 500 include one eero 7. Power Fibre 900 gets an eero Pro 7 in HU1 to HU17, but KCOM supplies the standard eero 7 in eligible rollout areas outside those postcodes. You can’t simply choose another model at checkout.

Power Fibre customers get newer Wi-Fi 7 routers

The eero 7 and eero Pro 7 both support Wi-Fi 7, WPA3, beamforming, OFDMA, guest Wi-Fi and automatic channel selection. The Pro adds a 6GHz band and has six internal antennas instead of two. Roll customers get the dual-band eero 6+, which uses Wi-Fi 6 and has no 6GHz band. It’s still a decent router, but it’s clearly the older design.

The two Wi-Fi 7 models have much faster Ethernet ports

Every eero has only two Ethernet sockets, but their speeds differ sharply. The eero 6+ stops at Gigabit speed, the eero 7 has two 2.5Gbps ports and the eero Pro 7 has two 5Gbps ports. Either socket can handle the incoming fibre connection or a wired device. Once one port is connected to KCOM’s fibre box, however, only one remains free unless you add an Ethernet switch. Those are impressive speeds despite the shortage of sockets.

Every eero can become part of a mesh

KCOM Power Home adds more eeros to the same network, and KCOM can supply up to four in total. Roll 900 already includes two eero 6+ units, so that package starts with a proper two-router mesh. Other packages include one eero and you’ll have to pay for any extras.

INTERACTIVE TOOL

Compare routers from any provider

This provider’s routers are pre-selected for comparison with one another. However, you can use this tool to compare any router from any major provider using the dropdown menus below.

Feature Amazon eero 6+ Amazon eero 7
Fibredog rating 6.4/10 7.0/10
Router included as standard Yes; one eero 6+ is included with Roll 300 and two are included with Roll 900. Yes; one eero 7 is included with Power Fibre 150 and Power Fibre 500. Power Fibre 900 also receives one eero 7 in eligible rollout areas outside HU1-HU17.
Router manufacturer Amazon eero Amazon eero
Router model R010001 PA10001
Wi-Fi standard Wi-Fi 6 Wi-Fi 7
Wi-Fi bands Dual-band Dual-band
2.4GHz supported ✓Yes ✓Yes
5GHz supported ✓Yes ✓Yes
6GHz supported ×No ×No
Beamforming ✓Yes ✓Yes
Antenna count 2 2
Maximum connected devices Up to 75 Up to 120
Stated coverage Up to 1,500 sq ft per unit Up to 2,000 sq ft per unit
Total Ethernet ports 2 2
MU-MIMO ×No ×No
OFDMA ✓Yes ✓Yes
WPA3 security ✓Yes ✓Yes
Guest network ✓Yes ✓Yes
Antenna type Internal Internal
Gigabit Ethernet ports 2 0
2.5Gb Ethernet ports 0 2
5Gb Ethernet ports 0 0
10Gb Ethernet ports 0 0
WAN port speed 1Gbps 2.5Gbps
USB ports 0 0
Telephone ports 0 0
ONT Ethernet input ✓Yes ✓Yes
Coaxial input ×No ×No
Power connection USB-C / external 15W power adapter USB-C / external 15W power adapter
Mesh support Provider mesh add-ons Provider mesh add-ons
Provider mesh product KCOM Power Home KCOM Power Home
Third-party router use You can use your own router You can use your own router
Modem mode ✓Yes ✓Yes
Compatible broadband technology fttp fttp
App management ✓Yes ✓Yes
Parental controls ✓Yes ✓Yes
QoS ✓Yes ✓Yes
Automated QoS ✓Yes ✓Yes
Device prioritisation ×No ×No
Anti-bufferbloat controls ✓Yes ✓Yes
Manual queue management (SQM/CAKE) ×No ×No
Smart channel selection ✓Yes ✓Yes
Security features WPA2/WPA3; TLS cloud connectivity; guest isolation; Profiles; automatic security updates; KCOM-included eero Secure advanced security, parental controls, ad blocking and network insights WPA2/WPA3; TLS cloud connectivity; guest isolation; Profiles; automatic security updates; KCOM-included eero Secure advanced security, parental controls, ad blocking and network insights
Gamer mode ×No ×No
Game traffic prioritisation ×No ×No
Gaming QoS profiles ×No ×No
Server ping routing tools ×No ×No
Latency dashboards ×No ×No
Per-device gaming presets ×No ×No
Gaming VPN routing features ×No ×No
Work from home mode ×No ×No
Automatic firmware updates ✓Yes ✓Yes
Firmware update notes eeroOS updates are pushed automatically on a rolling basis; customers can choose a preferred update window or install an available update manually. eeroOS updates are pushed automatically on a rolling basis; customers can choose a preferred update window or install an available update manually.
Router height 66mm 64mm
Router width 99mm 130mm
Router depth 97mm 130mm
Router weight 315g 606g
Power consumption 15W 15W
Router orientation Horizontal Horizontal
Wall mountable ×No ×No
Router colour White White
Self-installation ✓Yes ✓Yes
Browser admin interface ×No ×No
WPS ×No ×No
Status light control ✓Yes ✓Yes
Reset button ✓Yes ✓Yes
Wi-Fi on/off button ×No ×No
Where would you like to go next? See all tools See all tools
Compare all broadband deals

Three eeros, allocated by package rather than customer choice

Amazon eero 6+

Roll 300 and Roll 900 packages

Dual-band Wi-Fi 6, coverage quoted at up to 1,500 square feet, two Gigabit ports and support for up to 75 connected devices

Amazon eero 7 router

Power Fibre 150, 500 and some Power Fibre 900 orders

Dual-band Wi-Fi 7, coverage quoted at up to 2,000 square feet, two 2.5Gbps ports and support for up to 120 devices

Amazon eero Pro 7

Power Fibre 900 in HU1 to HU17

Tri-band Wi-Fi 7 with 6GHz, coverage quoted at up to 2,000 square feet, two 5Gbps ports and support for up to 200 devices

What changes across KCOM's three-router range

The eero 6+ is the least advanced model, but it still gives Roll customers Wi-Fi 6, WPA3, automatic updates, eero Secure and access to the same mesh system. Amazon quotes coverage of up to 1,500 square feet from one unit. Roll 900 is better equipped because KCOM includes two instead of one.

The eero 7 gives Power Fibre customers faster ports and more coverage than the eero 6+. Its two 2.5Gbps ports leave plenty of room for KCOM's 900Mbps service, and Amazon quotes coverage of up to 2,000 square feet. It supports Wi-Fi 7, although it's still dual-band and doesn't include the newer 6GHz band found on the Pro model.

The eero Pro 7 is the best of the three. It adds 6GHz, six internal antennas, two 5Gbps ports and support for up to 200 connected devices. KCOM includes it with Power Fibre 900 in HU1 to HU17 rather than charging for a separate premium-router upgrade.

KCOM's package split makes sense, but it doesn't explain it clearly enough. Power Fibre customers get the newer routers, Roll customers get the older eero 6+, and Power Fibre 900 can come with one of two routers depending on your address. You shouldn't have to study the small print to discover which router is included, so KCOM needs to make that distinction impossible to miss before anybody orders.

Amazon eero 6+

Power Fibre customers get Wi-Fi 7 without paying for a router upgrade, and the eero Pro 7 adds 6GHz plus very fast 5Gbps ports. Roll customers still get a secure, mesh-ready Wi-Fi 6 router, with two units included on Roll 900. The drawbacks are that your package decides which router you get, every model has just two Ethernet sockets and rolling packages use older routers. It's a good range, but not everyone gets its best features.

7.7 /10
Overall score

Wi-Fi quality score

This score is based on the router’s Wi-Fi standard, frequency bands, device capacity and key wireless features such as beamforming, MU-MIMO and OFDMA.

Router range

KCOM quotes coverage of up to 1,500 square feet for the eero 6+ and up to 2,000 square feet for both Wi-Fi 7 models. Those figures are useful for comparing the three routers, but they can't account for thick walls, several floors or an awkward place for the fibre socket. The good news is that every model can join the same eero mesh system.

The Wi-Fi 7 models have the better coverage claim

Amazon quotes up to 2,000 square feet for one eero 7 or eero Pro 7, compared with 1,500 square feet for the eero 6+. Treat those numbers as a best-case guide, not a promise for your home. A long house, stone walls or foil-backed insulation can leave a dead spot well inside the quoted area, while an open flat may need only one unit.

Your walls can defeat any published coverage figure

Brick, stone, mirrors, metal and several floors all weaken Wi-Fi. Keep the eero in the open and off the floor rather than hiding it behind a television or inside a cupboard. The first few metres of clear space can make more difference than the coverage number printed on the box.

Only the eero Pro 7 adds the 6GHz band

All three models use 2.4GHz and 5GHz. The lower band reaches farther, while 5GHz is faster over shorter distances. The eero app and automatic channel selection handle that choice for phones, laptops and other devices without asking you to manage each band yourself.

The eero Pro 7 also uses 6GHz, giving recent Wi-Fi 6E and Wi-Fi 7 devices another, usually less crowded band. The standard eero 7 is still Wi-Fi 7, but its dual-band design can't offer that extra route. Most homes will cope without it, though it's a useful extra in a busy area.

Power Home extends coverage without replacing the system

Every supplied router is already an eero mesh unit, so adding coverage doesn't mean throwing away the original box or creating another Wi-Fi network. KCOM Power Home can expand the system to as many as four eeros. Roll 900 starts with two units, while other packages start with one and charge for extras. KCOM doesn't promise a minimum speed in every room, so the mesh gives you better coverage rather than a contractual guarantee.

INTERACTIVE TOOL

Router range estimator

See how wall materials and router choice affect the quality of Wi-Fi around a typical home.

What are your internal walls mostly made from?
Which of these routers are you estimating?
Cutaway illustration showing connected devices throughout a family home
Perfect reception – strong, reliable Wi-Fi. Average reception – slower speeds may happen. Poor reception – weak signal or drop-outs.

Where would you like to go next?

Use the range estimate as a starting point

Enter the size and layout honestly. A compact flat with plasterboard walls behaves very differently from a long house built from stone, even when both have the same floor area.

The result can tell you whether one eero is likely to cope or whether it's worth paying for a second one. It can't see a chimney breast, underfloor heating or the cupboard where the fibre box has been installed.

Try the free improvements before paying for another eero

  1. Choose open, raised placement

    Keep it off the floor, out of cupboards and away from televisions, mirrors and large metal objects.

  2. Test every important room

    Check the office, bedrooms and television area rather than judging coverage from the sofa beside the router.

  3. Check the eero app

    The app shows connected devices and the mesh connection, which helps you spot a badly placed extra eero.

  4. Move nearby signal blockers

    A television or metal cabinet beside the router can waste useful coverage before the signal reaches the first wall.

  5. Add mesh for genuine dead zones

    Pay for another unit when better placement still can't reach an important room, not simply because the option appears at checkout.

Faster Wi-Fi has shorter range

The 2.4GHz band normally reaches farther and handles walls better, but it has less capacity and picks up more interference nearby. It suits printers, smart-home devices and anything else that needs a dependable everyday connection around the home more than maximum speed.

The 5GHz band is faster and is a better fit for televisions, laptops and consoles near an eero. Its signal fades faster through solid walls, which is why a quick test beside the router tells you very little about an upstairs office.

The Pro 7's 6GHz band can be faster and less crowded, but its range is shorter again. Let the eero system steer ordinary devices, then judge it by whether each room gets enough speed for what you do there. Maximum speed everywhere is neither realistic nor necessary.

KCOM includes a mesh-ready eero with every package, quotes up to 2,000 square feet from its Wi-Fi 7 models and includes two eero 6+ units with Roll 900. Up to four KCOM eeros can work together, so you can add coverage without replacing the system. Most packages still include only one unit, extra eeros cost more and KCOM makes no minimum room-speed promise. The range is good, but the result still depends on your home.

7.6 /10
Overall score

Router range score

This score estimates how well the provider’s standard routers are likely to deliver usable Wi-Fi speeds around a typical home, not just whether a faint signal reaches the back bedroom.

Whole-home Wi-Fi

KCOM keeps whole-home Wi-Fi simple because the supplied router is already an eero mesh unit. Add another eero and it joins the same network rather than creating a second Wi-Fi name. Roll 900 includes two units from the start; other packages include one, with paid extras available through KCOM Power Home. There's no minimum room-speed guarantee if coverage still disappoints.

Power Home expands your eero system

KCOM Power Home can provide up to four eeros in total. They share one network name and the eero app steers devices between them as you move around the home. Because every current KCOM router belongs to the same family, expanding coverage doesn't require a different mesh brand or a second app.

The extra eeros still belong to KCOM and have to be returned when the service ends or you reduce their number. They also stop working on another provider's network, so you're renting a managed KCOM system rather than buying mesh routers to keep.

Most packages include one eero, while Roll 900 includes two

Power Fibre 150, 500 and 900, plus Roll 300, start with one eero. One may be enough for a flat or smaller home, so KCOM doesn't include another router that many customers would never use.

Roll 900 is the exception: it includes two eero 6+ units, giving customers a proper mesh from day one. If you already know one router won't reach a distant room, that's a good inclusion despite the older Wi-Fi 6 routers.

Useful mesh, but no Wi-Fi guarantee

An extra eero can carry Wi-Fi around a corner, onto another floor or past a wall that blocks the main unit. Your devices stay on one network, and the app manages every eero together. That's cleaner and easier than adding a basic extender with another network name, another password and another set of controls. You can also move an eero later if one room changes use.

KCOM doesn't promise a minimum speed in every room, a refund or the right to leave if the mesh still falls short. You can pay for extra eeros and still have no promised speed you can hold KCOM to if one room remains slow. That leaves you relying on the routers rather than a firm promise. The eeros are good, but KCOM doesn't promise they'll fix every room.

Start with the eero that comes with your package unless you already know your home causes trouble. Add a second one for a room that consistently struggles, placing it where it can still receive a good signal rather than deep inside the dead zone. The calculator above can estimate how many units you need, but testing the actual rooms should settle it.

INTERACTIVE TOOL

Whole Home Wi-Fi Calculator

Just follow these simple steps and we will calculate how many, if any, ‘Whole Home Wi-Fi’ pods you will need from your provider.

Start here. Work through the steps in order.

Upload — Mbps
Latency — ms

Step 1: Agree to M-Lab’s data policy

M-Lab stores test data, including your IP address. Tick to agree before testing.

Step 2: Connect to your home Wi-Fi

Make sure the phone, tablet or laptop you are using is connected to your home Wi-Fi network.

Step 3: Turn mobile data off

If your device has mobile data, turn it off before you start walking around the house.

Step 4: Test next to your router

Stand next to your main Wi-Fi router and press the button below. This gives us your baseline speed.

Recorded result Router baseline
— Mbps

Step 5: Test your ground floor corners

Walk to each corner of your ground floor and run a test. If your home is not a perfect rectangle, do not overthink it. Just pick four sensible far-apart spots and keep the same numbering if you add another floor.

Corner 1 — Mbps
Corner 2 — Mbps
Corner 3 — Mbps
Corner 4 — Mbps

Last step: Add another floor or calculate

If you have another floor to test, add it below. If you have tested every floor you care about, press calculate.

Your Whole Home Wi-Fi result

Result waiting Run your tests, then press calculate.

    Where would you like to go next?

    
        

    KCOM mesh in five practical points

    Find the room that fails

    Test where people work, stream and play, then note whether the problem is weak coverage, low speed or both.

    Use the calculator before buying

    Enter the property details before assuming that one extra eero will solve every awkward room.

    One eero is standard on most packages

    Roll 900 includes two units; the other current packages start with one mesh-ready eero.

    Extra coverage costs more

    Compare the broadband price with the extra eero included, not only the cheaper package headline.

    Mesh improves coverage, not fibre speed

    Another eero can improve a weak room, but it can't make the broadband entering your home any faster.

    KCOM uses the same eero system across every package, lets it grow to four units and includes two eero 6+ boxes with Roll 900. That's a much better starting point than a basic router that needs replacing before mesh can be added. Most customers get only one unit, though, extras cost more and KCOM offers no minimum room-speed promise or coverage remedy. The mesh system justifies the rating; the lack of a guarantee keeps it from scoring higher.

    7.6 /10
    Overall score

    Whole-home Wi-Fi score

    This score estimates how well the provider helps customers fix Wi-Fi weak spots around the home, including mesh support, mesh devices, app control, Wi-Fi guarantees and router capability.

    Wired connectivity

    The eero 7 and eero Pro 7 have excellent port speeds, but every KCOM router gives you only two Ethernet sockets. After one connects to the fibre box, a single socket remains for a computer, console or switch. The eero 6+ limits that connection to Gigabit speed, while the Wi-Fi 7 models have plenty of room beyond KCOM's current 900Mbps packages.

    KCOM's Wi-Fi 7 routers are ready for faster wired devices

    The eero 7 has two 2.5Gbps sockets and the eero Pro 7 has two 5Gbps sockets. Either is more than fast enough for KCOM's 900Mbps service and can support a quick link to a desktop, network drive or wired mesh unit.

    The eero 6+ has two Gigabit sockets. That's fast enough for Roll 900 and one wired device today, but it couldn't handle a future package above 1Gbps or faster transfers between different computers on your home network.

    The real restriction is the number of sockets, not their speed

    Only one Ethernet socket remains after the eero is connected to KCOM's fibre box. That may be enough for a television or games console, but it's quickly used up if several devices that stay in one place all need reliable connections.

    A simple Gigabit or multi-gigabit switch solves the shortage. A basic Gigabit switch is enough for the eero 6+ in most homes today. Faster switches and devices can make use of the 2.5Gbps or 5Gbps ports on the Wi-Fi 7 models.

    Illustration of Fibo comparing different wired network connections

    How a simple wired KCOM network works

    Plugging devices directly into your router gives them a steadier connection than Wi-Fi. These router diagrams show the physical Ethernet ports, including any ONT or internet port used by the broadband connection itself.

    Amazon eero 6+
    1 ONT / internet port 1Gbps
    1 usable port 1Gbps 1Gbps
    Amazon eero 7
    1 ONT / internet port 2.5Gbps
    1 usable port 2.5Gbps 2.5Gbps
    Amazon eero Pro 7
    1 ONT / internet port 5Gbps
    1 usable port 5Gbps 5Gbps
    ★

    Use a wired connection for TVs, consoles and computers that stay in one place.

    ✓

    Use the fastest spare LAN port for the device or switch that needs the most speed.

    Use Ethernet for devices that stay put

    A desktop used for large downloads or uploads gets a steadier connection and avoids competing with every phone and television sharing Wi-Fi elsewhere in the home.

    A games console can avoid radio interference and the sudden speed changes caused by walls, crowded channels or somebody standing between it and the router during play.

    A television is easy to wire because it rarely moves, and its streaming traffic then leaves more wireless capacity for phones, tablets and laptops.

    Wiring televisions, computers and consoles takes some pressure off the Wi-Fi and gives the eero system less work to do. The awkward part is that you'll almost certainly need a switch if more than one device needs a cable.

    How to make two Ethernet sockets work in a busy home

    1. Count the usable sockets

      Each eero has two Ethernet ports, but the incoming KCOM connection normally occupies one of them.

    2. Gigabit still covers KCOM's current top speed

      Even the eero 6+ is fast enough to give one wired device the full speed of a 900Mbps package.

    3. Wi-Fi 7 customers get useful multi-gigabit headroom

      The eero 7 reaches 2.5Gbps and the Pro 7 reaches 5Gbps, comfortably beyond today's package speeds and ready for faster computers or storage drives.

    4. Wire devices that stay put first

      Start with a work computer, console or television, then leave devices that move around the home on Wi-Fi.

    5. Add a switch if needed

      A small Ethernet switch turns the remaining eero socket into several connections without replacing the router.

    The port speeds are excellent: eero 7 has 2.5Gbps Ethernet and eero Pro 7 reaches 5Gbps, while even eero 6+ can handle every current package. The weakness is quantity. Every model has only two sockets, and the fibre connection usually takes one. A home with several wired devices will need an Ethernet switch almost immediately. Fast ports lift the score, but one usable socket is hard to call generous.

    6.8 /10
    Overall score

    Wired connectivity score

    This score looks at how useful the router is if you want to plug devices in with cables, including the number of Ethernet ports, port speeds, phone ports and whether the router has the right connection for the network it uses.

    Router controls

    KCOM puts almost everything in the eero app. It handles setup, connected devices, guest access, family profiles, parental controls, security and automatic network management. Most people should find it easy enough, but there's no normal browser control panel, WPS button or detailed control over which devices get priority.

    Everyday controls sit in one app

    You can see connected devices, change the Wi-Fi details, create guest access, group devices into profiles and apply parental controls from your phone. The same app also manages every extra eero in a Power Home mesh.

    KCOM includes eero Secure rather than leaving its useful features behind another subscription. That adds advanced security, malicious-site blocking, ad blocking and network insights to every supplied eero.

    The app also handles software updates and lets you choose a preferred update window. The network is designed to look after itself, which is helpful if you'd rather not learn how channels and traffic queues work.

    There's no traditional browser control panel

    Eero expects you to use its mobile app. There's no browser-based control panel and no WPS button, so setup and management depend on a compatible phone plus an Amazon eero account. That's simple once it's running, but you can't fall back on typing the router address into a browser.

    The simple app leaves little room for detailed manual control

    The routers have no gaming mode, latency dashboard, server-routing tool or per-device gaming preset. Games will work perfectly well, but the software doesn't present a special set of gaming controls.

    Eero uses automatic QoS and anti-bufferbloat controls instead of manual queues. That can stop a busy download or upload from making calls and games stutter, and it works without asking you to understand networking jargon. The downside is that you can't choose detailed priorities, inspect the queues or tune SQM and CAKE yourself when the automatic choices don't suit your home.

    There's no manual device-priority button either. Letting the eero make those decisions is easier for most homes, but it gives you less control when its choices don't match what you want. You're trusting the router to make the right call for every device.

    Router controls

    KCOM router controls at a glance

    Here’s a quick look at the router controls you can expect, including app management, browser admin tools, Wi-Fi settings, security features and the physical buttons on the router itself.

    App management App-based controls Available
    Browser admin page Browser-based controls Unavailable
    Parental controls Household controls Available
    Guest network Separate guest Wi-Fi Available
    QoS Traffic priority controls Available
    Device prioritisation Per-device priority Unavailable
    Smart channel selection Wi-Fi optimisation Available
    Security features Built-in security notes Available
    Automatic updates Firmware updates Available
    WPS Push-button pairing Unavailable
    Reset button Physical reset control Available
    Wi-Fi on/off button Physical Wi-Fi control Unavailable

    Checked from manufacturer specifications. Fibredog tracks dozens of router specification parameters across dozens of provider routers. When a provider changes its router or features, this table is swiftly updated.

    What stands out

    • Useful app controls

      Guest Wi-Fi, profiles, parental controls, security and mesh management all sit together in the eero app.

    • No browser page or WPS shortcut

      You need a compatible phone and the app because eero doesn't provide a browser-based control panel.

    • Simple automation instead of detailed tuning

      Automatic QoS suits most homes, but enthusiasts can't manually prioritise devices or edit advanced traffic queues.

    The eero app is clean, easy to understand and handles the settings most households use. KCOM also includes eero Secure, so parental controls, ad blocking and advanced security aren't left behind another subscription. Automatic QoS and firmware updates reduce the work further. The rating stops at good because there's no browser interface, WPS or manual device priority, and the networking controls don't go very deep. It's easy to live with, but you can't do much tinkering.

    6.8 /10
    Overall score

    Router controls score

    This score looks at how easy the router is to manage, including app support, browser settings, parental controls, guest Wi-Fi, security features, updates and physical buttons.

    Using your own router

    KCOM makes using your own router much easier than most providers do. Its terms clearly allow a compatible router from another manufacturer, and KCOM publishes the Lightstream connection settings needed to get online. You can connect a replacement to the fibre box or use an eero in bridge mode, although KCOM won't configure or repair a router it didn't supply.

    How to put KCOM broadband through your own router

    Make sure the replacement router is suitable

    Choose a router with an Ethernet WAN socket, enough speed for your package and the Wi-Fi or controls you're buying it for. Check its LAN ports too, especially if you want more than the two sockets on an eero.

    Keep the KCOM eero and its cables safe

    Don't throw away or sell the supplied eero. It still belongs to KCOM and must be returned when your service ends.

    Keeping it also gives you a quick way to prove whether a future fault belongs to KCOM's line or your own router.

    Connect your router to the fibre box

    Disconnect the eero from the ONT, then connect the replacement router's WAN socket with Ethernet.

    Leave switches, mesh units and other devices disconnected until the replacement router itself is online.

    Enter KCOM's published connection details

    KCOM Lightstream uses PPPoE with your KCOM username and password, an always-on connection and an MTU of 1492.

    Use KCOM's current settings rather than copying an old forum post, and check the router maker's instructions for where each value belongs.

    Test the basic connection first

    Start with one computer connected by Ethernet and confirm that ordinary websites and a speed test work.

    Then test Wi-Fi, upload speed, calls, games and the rooms where you actually use the connection.

    Reconnect switches, mesh units and smart-home devices in stages. If something breaks, you'll know which change caused it instead of facing an entire rebuilt network that doesn't work.

    KCOM officially allows a suitable customer-owned router

    This isn't a hidden workaround. KCOM's terms allow your own router and its support pages publish the settings it needs. That's far better than a provider that lets you use your own router but refuses to explain how to connect it.

    You're responsible for choosing a compatible router and setting it up correctly. KCOM looks after the broadband service, but you'll need to ask the router manufacturer for help with its app, firmware and advanced settings.

    You'll need your KCOM connection details

    For Lightstream, the replacement router needs your KCOM username and password, PPPoE, an always-on connection and an MTU of 1492. Keep those details somewhere secure and update the router if you later change the account password.

    KCOM won't repair a third-party router or guide you through every menu. Keep a record of the settings and know how to reconnect the supplied eero, because that makes fault finding much quicker.

    Replace the eero to solve a specific problem, not from habit

    KCOM's eero range is already good. Power Fibre customers get Wi-Fi 7, the Pro 7 adds 6GHz and all three models provide mesh, automatic QoS, eero Secure and a straightforward app. Buying another router won't fix a poor location or a wall that blocks radio signals.

    A replacement makes sense when you need more Ethernet sockets, detailed network controls, a different mesh system or a router you already own and trust. Be clear about the problem first. Otherwise you may spend a lot of money to recreate features that KCOM already includes.

    Six sensible reasons to use your own router

    Your current router or mesh works well

    Keeping a familiar router preserves its device names, reservations, security rules and other settings you already understand.

    You prefer a different mesh system

    Your existing mesh can take over instead of moving every device onto KCOM's managed eero system.

    You want more detailed network controls

    Manual QoS, VLANs, VPN routing and detailed traffic reports can justify choosing a more advanced router.

    You want different parental controls

    Another router may suit your household better than the profiles and filters included with eero Secure.

    You want to keep the same home network

    Reusing the network name and settings can spare dozens of devices from being connected again one by one.

    You need more ports or another Wi-Fi feature

    A replacement can provide more Ethernet sockets or specialist features that KCOM's eero range doesn't include.

    Amazon eero 6+

    What changes when your router replaces the supplied eero

    KCOM still provides and supports the fibre connection. You take responsibility for the Wi-Fi, wired devices, security and settings on the home network behind it.

    The ONT

    The fibre connection is handed to your router

    Your replacement connects to KCOM's ONT and uses the published Lightstream details to connect to the internet.

    The KCOM eero can be removed or placed in bridge mode, depending on the setup you choose.

    Your own router

    Your router controls Wi-Fi and settings

    The replacement controls wireless names, passwords, connected-device rules, Ethernet settings and any local security features.

    That freedom also makes its firmware, backups, configuration and eventual replacement your responsibility.

    KCOM does almost everything right for customers who want their own router. KCOM clearly allows third-party routers, publishes the Lightstream settings and lets the supplied eero use bridge mode if you want to keep it in the network. You're responsible for compatibility, setup and support, which is reasonable, and the KCOM eero still needs returning when the service ends. KCOM doesn't ban your router or make you use an awkward workaround, so the near-perfect rating is justified.

    9.9 /10
    Overall score

    Using your own router score

    This score reflects how well the provider supports third-party router use, including ONT or modem-mode setup, WAN port speed, connection type and how cleanly your own router can take over the home network.

    Some links on this page may earn us a small commission if you click through and buy. This never affects either what you pay, or our scores and recommendations. If, however, you’d rather bypass affiliate links, use this direct KCOM link instead.

    Illustration of Fibo representing direct links to broadband providers