HEY!BROADBAND ROUTERS AND EQUIPMENT REVIEW

Hey!Broadband routers review: How good are they?

Which router you get from Hey!Broadband depends on what you order. Broadband on its own comes with the Linksys, adding a home phone gets you the Adtran, and Mesh WiFi or Wi-Fi Pro comes with the Nokia. They’re all Wi-Fi 6 routers, but their ports and controls are quite different.

By Data checked  Checked weekly
Hey!Broadband routers and equipment hero with FibreDog holding a Linksys SPNMX56HF-UK router

Hey!Broadband routers and equipment scorecard

Six key areas. One overall score. All calculated using our transparent methodology.

Wi-Fi quality

How good the standard routers’ Wi-Fi is in everyday use, looking at specifications, Wi-Fi bands/type, and how many devices they can support.

8.0/10

Wi-Fi range

How far the router’s Wi-Fi should reach around the home, with consideration given to local factors like large homes or thick walls.

7.6/10

Whole-home Wi-Fi

Whether the provider offers a mesh router system or extra help for larger homes, whether it’s good, and whether it’ll cost you extra.

6.8/10

Wired connectivity

How well the router supports Ethernet and wired devices, looking at number of ports, their speeds, and how accessible they are.

7.5/10

Router controls

How much control you get through the app, admin page and any controls you might have on the router itself.

8.3/10

Using your own router

How easily you can use your own third-party router or mesh hardware – whether you can use anything you like or if it’s limited in any way.

9.9/10

Wi-Fi quality

All three Hey!Broadband routers use Wi-Fi 6, so nobody is being handed an old bargain-bin model. Which one you get depends on the service, though, and that changes the number of wired ports, the controls you can use and whether you can add Hey!Broadband’s mesh system.

Key differences

Which Hey!Broadband router you get depends on what you order

Take broadband on its own and you get the Linksys SPNMX56HF-UK. Add a home phone and Hey!Broadband supplies the Adtran 854-v6, which has the phone sockets that service needs. Mesh WiFi and Wi-Fi Pro use the Nokia WiFi Beacon 3.1 because the router and extenders are designed to work together.

Every current Hey!Broadband router gives you Wi-Fi 6

Whichever router you get, it supports dual-band Wi-Fi 6, beamforming, MU-MIMO, OFDMA, WPA3 and guest Wi-Fi. That’s a good set of everyday features for phones, laptops, televisions and games consoles. None of the three uses the 6GHz band, so newer Wi-Fi 6E and Wi-Fi 7 devices can’t make full use of what they’re capable of.

The Linksys and Adtran leave room for faster fibre

Both the Linksys and Adtran have a 2.5Gbps WAN port, which means the connection coming into the router can run faster than Gigabit. What you plug into them is still limited to Gigabit: the Linksys has three LAN ports and the Adtran has four, plus two phone sockets and USB. The Nokia has three Gigabit Ethernet ports in total and nothing faster. That’s fine for every Hey!Broadband package today, but the Nokia would need replacing first if package speeds moved beyond 1Gbps.

Choosing mesh also decides which router you get

Mesh WiFi and Wi-Fi Pro orders come with a Nokia Beacon 3.1 router and matching extenders. They work as one system throughout the home. If you add mesh later, Hey!Broadband replaces your Linksys or Adtran rather than simply adding an extender to it.

INTERACTIVE TOOL

Compare routers from any provider

This provider’s routers are pre-selected for comparison with one another. However, you can use this tool to compare any router from any major provider using the dropdown menus below.

Feature Adtran 854-v6 Linksys SPNMX56HF-UK
Fibredog rating 7.2/10 7.4/10
Router included as standard Yes; allocated to residential home-phone installations, subject to availability and installation requirements. Yes; allocated to standard broadband-only installations, subject to availability and installation requirements.
Router manufacturer Adtran Linksys
Router model 854-v6 SPNMX56HF-UK
Wi-Fi standard Wi-Fi 6 Wi-Fi 6
Wi-Fi bands Dual-band Dual-band
2.4GHz supported ✓Yes ✓Yes
5GHz supported ✓Yes ✓Yes
6GHz supported ×No ×No
Beamforming ✓Yes ✓Yes
Antenna count 9 5
Maximum connected devices Up to 100 Up to 30
Stated coverage 360-degree coverage; no quantified floor-area figure published Up to 2,700 sq ft (about 251 m²) per node
Total Ethernet ports 5 4
MU-MIMO ✓Yes ✓Yes
OFDMA ✓Yes ✓Yes
WPA3 security ✓Yes ✓Yes
Guest network ✓Yes ✓Yes
Antenna type Internal H-Pol omnidirectional antennas Internal dipole and metal antennas
Gigabit Ethernet ports 4 3
2.5Gb Ethernet ports 1 1
5Gb Ethernet ports 0 0
10Gb Ethernet ports 0 0
WAN port speed 2.5Gbps 2.5Gbps
USB ports 1 0
Telephone ports 2 0
ONT Ethernet input ✓Yes ✓Yes
Coaxial input ×No ×No
Power connection 12V DC barrel connector / external power adapter 12V DC barrel connector / external power adapter
Mesh support Provider mesh add-ons Provider mesh add-ons
Provider mesh product Mesh WiFi (Nokia WiFi Beacons) Mesh WiFi (Nokia WiFi Beacons)
Third-party router use You can use your own router You can use your own router
Modem mode ✓Yes ✓Yes
Compatible broadband technology fttp fttp
App management ×No ✓Yes
Parental controls ×No ✓Yes
QoS ✓Yes ✓Yes
Automated QoS ✓Yes ×No
Device prioritisation ×No ✓Yes
Anti-bufferbloat controls ×No ×No
Manual queue management (SQM/CAKE) ×No ×No
Smart channel selection ✓Yes ✓Yes
Security features WPA3; firewall; NAT/NAPT; access-control lists; VPN pass-through; DMZ; port forwarding; guest network WPA2/WPA3; safe browsing; firewall; guest network; parental controls; device prioritisation
Gamer mode ×No ×No
Game traffic prioritisation ×No ×No
Gaming QoS profiles ×No ×No
Server ping routing tools ×No ×No
Latency dashboards ×No ×No
Per-device gaming presets ×No ×No
Gaming VPN routing features ×No ×No
Work from home mode ×No ×No
Automatic firmware updates ✓Yes ✓Yes
Firmware update notes The model supports provider-managed TR-069 firmware delivery; Hey!Broadband does not publish a customer update schedule. The Hey!Broadband-specific firmware supports automatic configuration through ACS/TR-069 and Linksys firmware updating; Hey!Broadband does not publish an update schedule.
Router height 249mm 185mm
Router width 90mm 86mm
Router depth 195mm 86mm
Router weight 1176g 500g
Power consumption 36W 24W
Router orientation Vertical Vertical
Wall mountable ✓Yes ×No
Router colour White White
Self-installation ✓Yes ✓Yes
Browser admin interface ✓Yes ✓Yes
WPS ✓Yes ✓Yes
Status light control ×No ×No
Reset button ✓Yes ✓Yes
Wi-Fi on/off button ×No ×No
Where would you like to go next? See all tools See all tools
Compare all broadband deals

Three routers, each tied to a particular service

Linksys SPNMX56HF-UK router

Broadband-only installations without home phone

Wi-Fi 6 with app controls, three Gigabit LAN ports, plus a 2.5Gbps WAN port for the fibre connection

Adtran 854-v6 for home phone

Installations that include a home phone

Wi-Fi 6 with four Gigabit LAN ports, a 2.5Gbps WAN port and two phone sockets

Nokia WiFi Beacon 3.1

Mesh WiFi and Wi-Fi Pro customer orders

Wi-Fi 6, app controls, three Gigabit Ethernet ports and Hey!Broadband's managed Nokia mesh system for whole-home Wi-Fi.

What actually changes between the three routers

If you're taking broadband on its own, the Linksys is the best all-rounder. Its app gives you parental controls and device prioritisation, and it has a 2.5Gbps WAN port. Linksys also claims it can cover up to 2,700 square feet.

The Adtran is larger and uses more power, but it gives you four LAN ports, two phone sockets and nine internal antennas. You manage it through a browser rather than an app, and it doesn't have the parental controls available on the Linksys and Nokia. That's a noticeable downgrade if you want to manage the router from your phone.

The Nokia is the neatest mesh option. It supports more connected devices than the other two, and Hey!Broadband uses the Beacon 3.1 both as your main router and as each extender.

Each router is best at a different job. The Linksys has the easiest controls, the Adtran provides the phone sockets and most wired ports, and the Nokia is the one you need for Hey!Broadband's mesh system. Those choices make sense, but Hey!Broadband should explain them before checkout. You shouldn't have to wait for installation day to find out which router you're getting.

Nokia WiFi Beacon 3.1 router

You get Wi-Fi 6, WPA3, beamforming, MU-MIMO and OFDMA whichever Hey!Broadband router arrives, so the core Wi-Fi is very good. Hey!Broadband also deserves credit for giving each router a proper job instead of keeping the better model for its fastest package. The Adtran has no app or parental controls, none of the three uses 6GHz and you can't simply choose your favourite unless you take the Nokia mesh service. Very good Wi-Fi, then, but not the same experience for everyone.

8.0 /10
Overall score

Wi-Fi quality score

This score is based on the router’s Wi-Fi standard, frequency bands, device capacity and key wireless features such as beamforming, MU-MIMO and OFDMA.

Router range

Your service decides which router covers your home. Linksys quotes up to 2,700 square feet from one router, Nokia quotes 1,500 square feet from each Beacon and Adtran doesn't publish a floor-area figure. Those numbers are only a starting point, because thick walls, several floors and a badly placed router can shrink the useful range very quickly.

Published coverage figures only tell you so much

Linksys claims up to 2,700 square feet for the SPNMX56HF-UK, while Nokia says each Beacon 3.1 covers up to 1,500 square feet. Adtran only promises 360-degree coverage and gives no floor-area figure. Don't read any of those claims as a promise for your home. A long, narrow house or one solid wall can defeat a single router even when the total floor area looks modest, while an open flat may need far less help.

Thick walls can undo even a very good router

Brick, stone, foil-backed insulation, mirrors and several floors all weaken Wi-Fi. Put the router in the open and as close to the centre of your home as the installation allows. Hiding it behind a television or inside a cupboard may look tidier, but you'll lose range before the signal even reaches the walls.

No 6GHz means fewer options in a crowded home

All three routers use 2.4GHz and 5GHz. The lower band reaches farther, while 5GHz carries more speed over shorter distances. Automatic channel selection handles most of that work without asking you to become a network engineer.

What you don't get is a 6GHz band for recent Wi-Fi 6E and Wi-Fi 7 devices. That omission matters most in dense areas with many neighbouring networks, not in every ordinary home where the existing bands remain perfectly usable.

Nokia mesh helps when one router isn't enough

Mesh WiFi includes one Nokia extender, while Wi-Fi Pro can supply up to three. Putting another Beacon beyond the wall or floor that's blocking the signal is usually more effective than chasing a larger coverage claim for one router. Your devices also stay on one Wi-Fi network as you move around the home. Hey!Broadband doesn't promise a minimum speed in every room, though, so the mesh improves your chances rather than guaranteeing the result.

INTERACTIVE TOOL

Router range estimator

See how wall materials and router choice affect the quality of Wi-Fi around a typical home.

What are your internal walls mostly made from?
Which of these routers are you estimating?
Cutaway illustration showing connected devices throughout a family home
Perfect reception – strong, reliable Wi-Fi. Average reception – slower speeds may happen. Poor reception – weak signal or drop-outs.

Where would you like to go next?

Treat the range estimator as an informed starting point

Enter the property size and layout honestly. A compact flat with plasterboard walls is a very different radio environment from a long stone house, even when their floor areas match.

The result can tell you whether one router is plausible or mesh deserves budgeting from the start. It can't see a chimney breast, underfloor heating or the cupboard where the installer was asked to hide the router.

Get the free improvements right before buying another router

  1. Choose open, raised placement

    Keep the router off the floor, out of cupboards and well away from large metal objects.

  2. Test every important room

    Check the rooms where people actually work, stream and play, not only the sofa beside the router.

  3. Check the app's device view

    Linksys and Nokia customers can inspect connected devices and manage the whole home network without opening a browser.

  4. Remove obvious nearby blockers

    A television, mirror or metal cabinet beside the router can waste valuable coverage before the walls even get involved.

  5. Add Nokia mesh for genuine dead zones

    Use an extender when placement cannot reach a distant room, not simply because the add-on is offered.

Faster Wi-Fi usually has shorter legs

The 2.4GHz band normally reaches farther and survives walls better, but it offers less capacity and meets more interference around the home. That makes it a good fit for smart-home devices, printers and anything else that needs reliable reach more than maximum speed.

The 5GHz band carries more speed and is usually better for laptops, televisions and consoles near an access point. Its signal fades more quickly through dense materials, which is why a fast test beside the router tells you little about an upstairs office.

Let the router steer ordinary devices automatically, then judge it by whether each room gets enough speed for what you actually do there. A phone doesn't need maximum speed everywhere, but a work computer shouldn't lose a stable connection whenever somebody closes a door.

The Linksys has the best published coverage figure, and Hey!Broadband can add up to three Nokia Beacons when one router isn't enough. A long home, thick walls or several floors can therefore be covered without asking one router to do everything. You don't get to choose the Linksys unless your service qualifies for it, though, and none of the published figures is a promise. Hey!Broadband also gives you no minimum room-by-room Wi-Fi speed.

7.6 /10
Overall score

Router range score

This score estimates how well the provider’s standard routers are likely to deliver usable Wi-Fi speeds around a typical home, not just whether a faint signal reaches the back bedroom.

Whole-home Wi-Fi

Hey!Broadband's mesh service uses Nokia Beacon 3.1 units throughout, so the router and extenders are designed to work together. It can make a big difference in a long home or across several floors, and you can choose it when you sign up. It costs extra, and Hey!Broadband doesn't promise a minimum Wi-Fi speed in every room if it still falls short.

Mesh changes the router and coverage

Mesh WiFi comes with a Nokia Beacon 3.1 as the main router plus one matching extender. Wi-Fi Pro can include up to three extenders where the size and layout of your home need them. Every Beacon belongs to the same system, so your devices can move around the home without you juggling separate Wi-Fi network names.

If you add mesh later, Hey!Broadband replaces your Linksys or Adtran with a Nokia router rather than simply posting an extender. That means changing the main router after your broadband has already been installed.

Standard broadband includes one router and no mesh extender

Superfast, Megafast and Gigafast include one router, not a mesh extender. If that covers your home, you don't pay for another box you don't need. That's exactly as it should be.

If you already know one router won't reach an upstairs office or a room at the far end of the house, include mesh when you sign up. You'll get the Nokia from day one and avoid changing the main router later.

Useful mesh, but still no Wi-Fi guarantee

A second Beacon can carry Wi-Fi around a corner, up another floor or past a wall that blocks the main router. Because it uses the same network name, your phone and laptop can move around the home without you switching between separate Wi-Fi networks. You also manage the router and extenders in one app instead of dealing with a second set of controls. That's much tidier than adding a basic extender.

Hey!Broadband doesn't promise a minimum speed in every room, a refund or the right to leave if coverage is still poor. You can pay for several Beacons and still have no published threshold to point to if one room remains unusable. If that happens, the problem is still yours to solve. The mesh system is useful, but it isn't a Wi-Fi guarantee.

One router is the right starting point unless you already know the layout will cause trouble. Mesh is worth adding for a room that genuinely struggles, with each extender placed where it can still receive a good signal rather than inside the dead zone. The calculator above can estimate how many access points you need, but room-by-room testing should make the final decision.

INTERACTIVE TOOL

Whole Home Wi-Fi Calculator

Just follow these simple steps and we will calculate how many, if any, ‘Whole Home Wi-Fi’ pods you will need from your provider.

Start here. Work through the steps in order.

Upload — Mbps
Latency — ms

Step 1: Agree to M-Lab’s data policy

M-Lab stores test data, including your IP address. Tick to agree before testing.

Step 2: Connect to your home Wi-Fi

Make sure the phone, tablet or laptop you are using is connected to your home Wi-Fi network.

Step 3: Turn mobile data off

If your device has mobile data, turn it off before you start walking around the house.

Step 4: Test next to your router

Stand next to your main Wi-Fi router and press the button below. This gives us your baseline speed.

Recorded result Router baseline
— Mbps

Step 5: Test your ground floor corners

Walk to each corner of your ground floor and run a test. If your home is not a perfect rectangle, do not overthink it. Just pick four sensible far-apart spots and keep the same numbering if you add another floor.

Corner 1 — Mbps
Corner 2 — Mbps
Corner 3 — Mbps
Corner 4 — Mbps

Last step: Add another floor or calculate

If you have another floor to test, add it below. If you have tested every floor you care about, press calculate.

Your Whole Home Wi-Fi result

Result waiting Run your tests, then press calculate.
    
        

    Hey!Broadband mesh in five practical points

    Find the room that actually fails

    Test where people use broadband and note whether the problem is coverage, speed or both.

    Let the calculator challenge your guess

    Use the property details to estimate whether one, two or more access points make sense.

    Mesh is not bundled with ordinary packages

    One router is standard; Nokia extenders come through Mesh WiFi or Wi-Fi Pro.

    Coverage raises the real package cost

    Compare the broadband plus mesh price, not the cheaper headline figure without an extender.

    Buy coverage, not imaginary speed

    Mesh improves where Wi-Fi reaches. It does not make the fibre entering the home any faster.

    Hey!Broadband has built its mesh service properly: the Nokia router and extenders work as one system, Mesh WiFi includes one extender and Wi-Fi Pro can provide up to three. That's a good option for larger homes, and you can choose it when signing up. Regular packages don't include an extender, adding mesh later means changing the router, and there is no minimum Wi-Fi speed, refund or other promise if coverage still disappoints. Useful mesh, yes. Guaranteed coverage, no.

    6.8 /10
    Overall score

    Whole-home Wi-Fi score

    This score estimates how well the provider helps customers fix Wi-Fi weak spots around the home, including mesh support, mesh devices, app control, Wi-Fi guarantees and router capability.

    Wired connectivity

    Every supplied router gives you Gigabit Ethernet, which is enough for any current Hey!Broadband package. The Adtran has four LAN ports and the Linksys has three, while the Nokia has fewer spare sockets once the broadband is connected. None lets one device run above Gigabit speed, so a heavily wired home may need a small switch and any future package above 1Gbps would need a different router.

    Every router can deliver Gigabit speed to wired devices

    Every LAN port you can plug a device into runs at Gigabit speed. That's enough for a television, games console, desktop or work dock, and it matches the maximum speed of Hey!Broadband's current Gigafast 900 package without needing unusual cables or adapters.

    The Linksys has three Gigabit LAN ports and the Adtran has four. The Nokia has fewer spare sockets once its broadband connection is plugged in, so Nokia users are much more likely to need their own Ethernet switch as well.

    The incoming connection can be faster than the LAN ports

    Linksys and Adtran can take 2.5Gbps from the fibre box, so their incoming connection has room to grow. But they can only send up to 1Gbps through any one LAN port. A future package above 1Gbps could still be shared between several wired and wireless devices, but one computer couldn't use the full speed.

    Nokia stops at Gigabit on both sides. If Hey!Broadband launches multi-gigabit packages, it will need to supply a different router before one wired device can use all that speed. The 2.5Gbps WAN ports on the other two routers don't remove their Gigabit LAN limit.

    Illustration of Fibo comparing different wired network connections

    How a simple wired Hey!Broadband network works

    Plugging devices directly into your router gives them a steadier connection than Wi-Fi. These router diagrams show the physical Ethernet ports, including any ONT or internet port used by the broadband connection itself.

    Adtran 854-v6
    1 ONT / internet port 2.5Gbps
    4 usable ports 1Gbps 1Gbps each
    Linksys SPNMX56HF-UK
    1 ONT / internet port 2.5Gbps
    3 usable ports 1Gbps 1Gbps each
    Nokia WiFi Beacon 3.1
    1 ONT / internet port 1Gbps
    2 usable ports 1Gbps 1Gbps each
    ★

    Use a wired connection for TVs, consoles and computers that stay in one place.

    ✓

    Use the fastest spare LAN port for the device or switch that needs the most speed.

    Use Ethernet where consistency matters more than convenience

    A desktop used for large uploads benefits from consistent throughput and avoids competing with every phone, tablet and television using the wireless network nearby.

    A console where stable latency matters can avoid radio interference, crowded channels and the speed changes that happen when somebody moves between the router and the device.

    A television streaming high-bitrate video is easy to wire because it rarely moves, and the cable leaves more Wi-Fi capacity for phones and tablets that do.

    Wiring those fixed devices takes radio interference out of the equation and leaves more Wi-Fi capacity for phones, tablets and anything else you carry around the home.

    How to make a limited number of LAN ports go further

    1. Count LAN ports, not every socket

      The WAN connection, telephone ports and USB socket do not replace Ethernet sockets for ordinary wired devices.

    2. Gigabit LAN suits every current package

      One wired device can use the full practical speed of Gigafast 900 without needing multi-gigabit networking.

    3. Multi-gigabit fibre would expose the limit

      The 2.5Gbps WAN ports help, but no supplied router provides a faster-than-Gigabit LAN socket for one device.

    4. Wire fixed devices before anything mobile

      Start with work computers, consoles and televisions, then leave phones and other mobile devices on Wi-Fi.

    5. A small switch solves the socket shortage

      Connect a Gigabit Ethernet switch when the router has fewer LAN sockets than the room requires.

    Every Hey!Broadband router has Gigabit LAN, and the Linksys and Adtran can take 2.5Gbps from the fibre box. The Adtran also gives you four LAN ports plus its phone sockets. That's plenty for most homes and every current package. The Nokia has fewer spare sockets, though, and none of the three routers can send more than 1Gbps to one wired device. If you need more sockets than your router provides, you'll need an Ethernet switch.

    7.5 /10
    Overall score

    Wired connectivity score

    This score looks at how useful the router is if you want to plug devices in with cables, including the number of Ethernet ports, port speeds, phone ports and whether the router has the right connection for the network it uses.

    Router controls

    If you get the Linksys or Nokia, you can manage the router from an app. Home-phone customers get the Adtran and have to use its browser admin page instead. All three handle the settings most homes need, but none gives gamers or home-network enthusiasts much room to tinker.

    Linksys and Nokia put controls on your phone

    The Linksys app covers connected devices, guest Wi-Fi, parental controls, safe browsing and device prioritisation. Those are the controls you'll actually reach for from day to day.

    Nokia's app manages the Beacon mesh, connected devices, guest access and parental controls. It is particularly useful when several Beacons need placing and checking around the home.

    Home-phone customers get the Adtran, so they lose the supported app and parental controls available with Linksys and Nokia. You can still change settings through a browser, but checking or pausing a device from your phone isn't an option.

    Every router retains proper browser controls

    All three routers have a browser admin page, WPS, guest Wi-Fi and automatic firmware updates. Hey!Broadband installs those updates for you, so you don't need to find firmware files or remember to update the router yourself when a new version arrives.

    The supplied controls do not go far enough for serious enthusiasts

    There's no dedicated gaming mode, latency dashboard, game-routing service or per-device gaming preset on any supplied router. A console can still work perfectly well, but the router won't analyse servers or build a special low-latency route for it.

    Manual queue management such as SQM or CAKE is also absent, so you cannot tune bufferbloat with the supplied interface. That can matter when a busy upload makes games or video calls stutter despite the speed test looking healthy. The automatic settings are easier for most people, but they give you much less control when the defaults don't suit your network.

    The Adtran automates QoS and the Linksys gives you simpler device prioritisation. That's enough for most homes, but it isn't the same as detailed traffic shaping. You'll need your own router and Hey!Broadband's bridge mode if you want VLANs, manually tuned queues or detailed traffic monitoring.

    Router controls

    Hey!Broadband router controls at a glance

    Here’s a quick look at the router controls you can expect, including app management, browser admin tools, Wi-Fi settings, security features and the physical buttons on the router itself.

    App management App-based controls Varies by router
    Browser admin page Browser-based controls Available
    Parental controls Household controls Varies by router
    Guest network Separate guest Wi-Fi Available
    QoS Traffic priority controls Available
    Device prioritisation Per-device priority Varies by router
    Smart channel selection Wi-Fi optimisation Available
    Security features Built-in security notes Available
    Automatic updates Firmware updates Available
    WPS Push-button pairing Available
    Reset button Physical reset control Available
    Wi-Fi on/off button Physical Wi-Fi control Unavailable

    Checked from manufacturer specifications. Fibredog tracks dozens of router specification parameters across dozens of provider routers. When a provider changes its router or features, this table is swiftly updated.

    Controls you'll actually use

    • Useful app control

      Linksys and Nokia apps handle the jobs most people actually perform, including guest access and device checks.

    • Advanced settings stay in the browser

      All three routers provide local administration for networking tasks that do not belong in a simplified app.

    • Good everyday controls, little tinkering

      You get more help with family Wi-Fi than with gaming, a homelab or manually controlling how the router handles traffic.

    Linksys and Nokia give you useful apps, and every Hey!Broadband router has a browser admin page, guest Wi-Fi, WPA3 and automatic updates. That's more than enough control for most homes and deserves the excellent rating. Home-phone customers get a noticeably worse deal from the Adtran, with no supported app or parental controls. Gamers and home-network enthusiasts will also need their own router for detailed traffic management, anti-bufferbloat controls or dedicated gaming features.

    8.3 /10
    Overall score

    Router controls score

    This score looks at how easy the router is to manage, including app support, browser settings, parental controls, guest Wi-Fi, security features, updates and physical buttons.

    Using your own router

    Few providers make using your own router as easy as Hey!Broadband. Ask for its free bridge mode service and your router can take over the Wi-Fi and network controls without a makeshift workaround. Hey!Broadband still looks after the broadband line, while you look after the router you chose.

    How to move Hey!Broadband onto your own router safely

    Check the replacement can handle the job

    Choose a router with an Ethernet WAN port, enough throughput for your package and the Wi-Fi or control features you are actually replacing. Check its LAN speeds as well, particularly if the entire point is to escape the Gigabit limit on Hey!Broadband's supplied routers.

    Ask for bridge mode before changing cables

    Contact Hey!Broadband and request its free bridge mode service before installation whenever possible. That's the easiest way to avoid changing the setup later.

    A later request can mean returning your existing router or arranging an engineer visit, so don't assume Hey!Broadband can always change it remotely.

    Connect the new router to the bridged service

    Once bridge mode is ready, use Ethernet to connect the Hey!Broadband fibre box to your router's WAN port.

    Keep the supplied power and network leads close by until the replacement has passed every important test.

    Follow the settings Hey!Broadband supplies

    Use the connection information provided for your installation rather than copying settings from an unrelated forum post.

    Hey!Broadband supports the bridge service, but it won't manage the menus or firmware on a router it didn't supply.

    Prove the connection before rebuilding everything

    Test one computer over a wired connection before changing anything else.

    Then check Wi-Fi, upload speed, latency and every important room where the connection matters most in daily use.

    Only reconnect switches, mesh nodes and smart-home devices after the basic internet connection is stable. Add them in stages so one troublesome device cannot hide the point where the network began failing.

    Hey!Broadband officially supports your own router

    Hey!Broadband's free bridge mode service lets your own router take over properly. That's much better than providers that merely tolerate replacement routers and leave you wondering whether customer service will help when something goes wrong.

    Request it before the installation where possible. Adding bridge mode later can mean returning the supplied router or booking an engineer, depending on the setup already installed in your home.

    Support stops at your router

    Hey!Broadband can give you the connection details needed to get your router online. It won't configure a third-party app, mesh system or specialist firewall for you. That's fair, but you'll need the administrator password, the router's instructions and enough confidence to undo a setting if it loses the connection.

    Keep a note of what you changed and how to put the supplied setup back. If something goes wrong, that makes it much easier to tell whether the fault is with the fibre line or your router.

    Replace a decent router only when you have a reason

    The supplied Linksys, Adtran and Nokia models are all perfectly decent Wi-Fi 6 routers. Buying another one simply because the box promises more speed is unlikely to transform a home where poor placement or thick walls cause the real problem.

    Your own router makes sense when you need 6GHz, multi-gigabit LAN, better security, more useful parental controls or a mesh system you already trust. It should fix a problem you can name, not become an expensive attempt to improve a network that was already working well.

    Six good reasons to use your own router

    You already own a router you like

    Keeping a proven router avoids needlessly rebuilding familiar rules, reservations and device names from scratch.

    You prefer another mesh ecosystem

    Bridge mode lets an existing mesh handle Wi-Fi instead of moving everything onto Nokia Beacons.

    Controls the supplied routers lack

    Advanced QoS, VLANs, VPN routing or detailed traffic monitoring can justify buying your own router.

    Your household needs better parental controls

    A third-party system can provide consistent controls regardless of whether Hey!Broadband allocated Linksys, Adtran or Nokia.

    You want familiar settings to remain familiar

    Keeping the same network name and configuration can spare dozens of devices from being connected again.

    You want 6GHz or faster LAN

    None of Hey!Broadband's routers offers either feature, so you'll need your own router to get them.

    Nokia WiFi Beacon 3.1 router

    What bridge mode changes and what it leaves alone

    Hey!Broadband still looks after the fibre connection. You become responsible for the Wi-Fi, wired devices and settings on the home network behind it.

    The ONT

    Hey!Broadband hands over the internet connection

    Bridge mode stops the supplied router from running the main internet connection for your home network.

    Your own router receives that connection and becomes the main internet gateway for everything in your home.

    Your own router

    Your router takes over Wi-Fi and settings

    The replacement controls wireless names, passwords, connected-device rules, port settings and any local security features.

    That freedom also means its firmware, backups and configuration are now your responsibility.

    If you want to use your own router, Hey!Broadband is about as accommodating as a provider can be. Bridge mode is free, officially supported and lets you replace the supplied Wi-Fi, controls and Gigabit LAN limit without relying on a workaround. Hey!Broadband gives you the connection details too. You'll have to configure and support your own router, which is fair, and asking for bridge mode after installation can mean returning equipment or booking an engineer visit.

    9.9 /10
    Overall score

    Using your own router score

    This score reflects how well the provider supports third-party router use, including ONT or modem-mode setup, WAN port speed, connection type and how cleanly your own router can take over the home network.

    Some links on this page may earn us a small commission if you click through and buy. This never affects either what you pay, or our scores and recommendations. If, however, you’d rather bypass affiliate links, use this direct Hey!Broadband link instead.

    Illustration of Fibo representing direct links to broadband providers